background image

XMP 240 C AT • Configuration Tools

69

Groups

Groups allow master control of Gain, Mute, Bass, Treble, Loudness and Meter for groups of 
channels. Groups are used in macros and other control configurations.
Click 

Tools > Configure Groups

 to open the 

Configure Groups

 dialog box.

1

 

Select Group

5

 

Apply Button

2

 

Select Control Type

6

 

Delete Current Group Button

3

 

Available Group Members

7

 

Close Button

4

 

Change Name Button

Figure 95. 

Group Controls Dialog Box

1  

Select Group

 — Provides a drop-down menu to select the number of the group to 

be configured. If the group has been configured and named, the group name appears 
next to the group number. If the group slot is empty, it reads 

<empty>

 next to the group 

number. There are 64 group slots available.

2  

Select Control Type

 — Group controls can manage 

Gain

Mute

Bass

Treble

Loudness

, or 

Meter

 for the specified inputs, mix-points, or outputs. From the 

Select 

Control Type

 panel, select the type of control from the 

Gain

Mute

Bass

Treble

,

 

or 

Treble 

lists.

NOTE:

 

Bass

 and 

Treble

 are only available if the Bass and Treble filters are inserted 

on a channel and only allow channels with the filters to be placed in a group.

3  

Available Group Members

 — This section populates according to the selected 

control type and lists all inputs, mix-points, and outputs available to be added as group 
members. Check the box next to a member to add it to the group. Group members 
must be the same control type. The maximum number of group members for a single 
group is 128.

NOTE:

  Loudness processors can be selected from input and output gain stages.

4  

Change Name Button

 — Once a group has been created, select it from the 

Select 

Group 

drop-down menu (

1

), click 

Change Name

 to change the name of the selected 

group.

5

  

Apply Button

 — Click 

Apply

 after changes to a group have been made. The 

Confirm 

Group Details

 dialog box opens allowing the group name and number to be edited. 

Click 

OK

 to apply group changes. 

6  

Delete Current Group Button

 — Select a group from the 

Select Group

 drop-down 

menu and click 

Delete Current Group

 to delete the group.

7

  

Close Button

 — Click 

Close

 to close the dialog box. Any changes that have not been 

applied will be lost.

Содержание XMP 240 C AT












































































































































Отзывы: