Extron electronics XMP 240 C AT, Руководство пользователя, Страница: 27 / 139

XMP 240 C AT • DSP Configurator Software 21
1. Click the expansion or input name field.
Figure 26. Input Name Field
2. Delete or highlight the text, and type the desired name.
Figure 27. Input Name
3.
Press the <
Enter
> key or navigate away from the field to confirm and apply the new
name. Press the <
Down Arrow
> key to navigate to and highlight the next name field.
Figure 28. Renamed Input
Inputs Overview
With the Extron Expansion Port (EXP), two EXP enabled devices can be connected for
bidirectional communication. When two units are connected, one unit must be set as the
Primary Unit and the other must be set as the Secondary Unit (see
Expansion Bus on
page 88). This synchronizes the sampling clocks of the two units.
AT inputs allow a XMP 240 C AT model to receive signal from the audio network. Network
audio routing is done with Dante Controller (see
Dante Controller on page 89).
Figure 29. AT Inputs
figure 16. Expansion Input Name Field
figure 17. New Expansion Input Name
figure 18. Renamed Expansion
figure 19. Expansion Inputs Panel