Extron electronics VNM EC 200 Скачать руководство пользователя страница 24

Страница: 24 / 242

Configuring the Network Settings

The VNM EC 200 is pre-configured with the following network settings.

IP address:

192.168.254.254

Subnet mask:

255.255.255.0

Gateway:

192.168.254.1

MTU:

1500

NOTE:

With these settings, the units connected to the VN-Matrix network must use

IP addresses within the range of 192.168.254.2 through 192.168.254.253 and use the
same subnet mask.

Use the following procedure to change the network settings of the VNM EC 200.

Log on the VNM EC 200 (see

Accessing the Web‑based User Interface

page 11).

Click the

Configuration

tab (see figure 11,

The

Configuration

page opens.

Figure 11.

Configuration Page — Configuring the Network Settings

Under

Device

Properties

, click the

Network

link (

NOTE:

Make sure the VNM EC 200 is not "paired". If it is paired, the unit must first

be unpaired (see

Unpairing controllers

on page 177). Be aware that unpairing

and then pairing a VNM EC 200 deletes device files and custom input and output
modes.

Change the

Address

Netmask

Gateway

, and

MTU

fields as necessary (

NOTE:

The default value of

1500

in the

MTU

field is the correct setting for most

applications.

Click

Apply

Changes

(

), to save and apply the configuration.

VNM EC 200 • Single EC 200 Configuration

Содержание VNM EC 200



















































































































































































































































Результаты поиска

Содержание VNM EC 200

Отзывы:

Extron electronics VNM EC 200, Руководство пользователя, Страница: 24 / 242

Результаты поиска

Содержание VNM EC 200

Отзывы: