Extron electronics VNM EC 200, Руководство пользователя, Страница: 106 / 242

Preset Manager Page
The Preset Manager page enables connection of system devices from the device list for
use in the VN-Matrix system. It allows users to create, save, and recall simple and complex
system configurations using drag and drop rules under the following guidelines:
•
A preset can contain a mix of VNM device types.
NOTE: Some device combinations are not allowed (see Preset Design –
Connection Rules on page 100).
•
A preset can have a set of attributes that define the mode and configuration parameters
of devices in that preset.
• A preset can be named and saved for easy recall.
• A preset can be recalled by name using HLI commands.
• Presets are non-exclusive. The recall of one preset does not affect other devices in the
VNM system that are not part of that preset.
Click the Preset Manager tab to open the page (see figure 79).
1 1 3 3 4 4
5 5
6 6
2 2
Figure 79. Preset Manager Page
The Preset Manager page is divided into four panels:
1
Preset List
2
Matrix Devices list
3
The Preset: Design workspace
4
Device Attributes
In addition, there are two toolbars:
5
To create, launch, stop, copy, rename, or delete a selected preset, a toolbar is located
at the bottom of the
Preset List
panel (
1
).
6
When a new preset is configured or an existing preset modified, it is saved using the
toolbar at the bottom of the Preset: Design workspace (
3
).
VNM EC 200 • Preset Manager 96