TSP Series • Installation Guide
The Extron TSP 1, TSP 2, and TSP 3 are tempered glass TLP Screen Protectors that
can minimize damage to the touchscreens of Extron TouchLink Touchpanel models:
•
TSP 1
— TLP Pro 525C, TLP Pro 525M, TLP Pro 525T, TLS 525M, and
TLC Pro 526M
•
TSP 2
— TLP Pro 725C, TLP Pro 725M, TLP Pro 725T, TLS 725M, and
TLC Pro 726M
•
TSP 3
— TLP Pro 1025M, TLP Pro 1025T, TLS 1025M, and TLC Pro 1026M
To attach the screen protector:
NOTE:
If the touchpanel has already been mounted, Extron recommends
removing the touchpanel and placing it on a flat, stable surface before
installing the screen protector.
1.
Clean the touchpanel screen thoroughly, using an alcohol wipe.
2.
Wipe the screen with a microfiber cloth to ensure it is dry and, if required, use
dust remover to ensure no dust or other particles remain.
3.
Place the touchpanel on a flat surface and ensure that it cannot move while the
screen protector is being attached.
4.
Peel the backing film away from the screen protector.
NOTE:
Do not touch the adhesive surface of the screen protector.