TP Receivers • Installation and Operation
2-3
N
The following transmitters are compatible with the
TP R 15HD A, TP R BNC A and TP R BNC AV
receivers:
TP T 15HD 45,
TP T A 45,
TP T 15HD A,
TP T 15HD AV,
TP T 468
N
All TP transmitters include a 15V or 12V external
power supply. The transmitters (with the exception of
the TP T 15HD 45 and TP T A 45) also receive power
from the associated Extron TP receiver(s) (with the
exception of the TP R 15HD A) via the TP cable. Extron
recommends using the local power supply; however, the
power supply may not be necessary in some applications.
Use the following guidelines:
•
The TP T 15HD A and TP T 15HD AV may not
require a local power supply for cable lengths of 300
feet or less.
•
All of the following transmitters require the local
power supply:
TP T BNC DA4
TP T 15HD 45
TP T A 45
VTT001
Any transmitter connected to a TP R 15HD A
If problems are encountered, such as a missing or poor
quality image on the output, use the local power supply.
See
Troubleshooting
, on page 2‑19 for other indications
that may require using the local power supply.
9
Adjust the picture controls on the transmitter(s) and the
receiver. See
Controls and Indicators
in this chapter and
refer to the
TP Transmitters Family User’s Manual
, part
#
68-546-03
.
