Updating the Firmware
Firmware for the TLP Pro 525C and 725 series touchpanels can be upgraded using Toolbelt or
the touchpanel web page. Before starting, consult your IT team and ensure that the touchpanel
has a unique IP address.
Downloading Firmware
1.
Power on a computer that is connected to the same network as the touchpanel.
2.
Go to
Download
(see figure 33,
1
) and then click
Firmware
(
2
).
1
1
1
2
2
2
Figure 34.
Firmware Download Center
3.
Click the letter
T
from the alphabet menu.
4.
Scroll down the page until you find the firmware for your TLP Pro model.
Figure 35.
TLP Pro Firmware download
5.
Click
Release Notes
(see figure 19,
1
) for more information about the firmware (optional).
6.
Click
Download
(
2
).
7.
Enter the required information and click the download button. An executable (.exe) file is
downloaded to your computer. Run this program to place the firmware on your computer for
future use. Make a note of the folder where the firmware is saved.
Updating Firmware Using Toolbelt
For information about using Toolbelt to update the firmware, see the
Toolbelt Help File
.
TLP Pro 525C and 725C Series Touchpanels • Configuration Software
36
