Network
The image below shows the entire
Network
screen. Because of size of the touchscreen, you
can only see part of the screen at any time. Scroll up or down within the screen to navigate.
NOTE:
The
Cancel
and
Save
buttons float so that they always appear at the bottom of
the screen, even when only the top part of the screen is displayed. They are used to
save changes to the network addresses or to cancel the changes without saving them.
Network
EXIT
Save
DHCP
TLP-Pro-300M-AB-CD-EF
Hostname
192.168.254.251
IP Address
255.255.255.0
Subnet Mask
0.0.0.0
Gateway
127.0.0.1
DNS Primary
00-05-A6-AB-CD-EF
MAC Address
Domain Name
extron.com
Cancel
Network
EXIT
DHCP
TLP-Pro-300M-AB-CD-EF
Hostname
192.168.254.251
IP Address
255.255.255.0
Subnet Mask
0.0.0.0
Gateway
127.0.0.1
DNS Primary
00-05-A6-AB-CD-EF
MAC Address
Domain Name
extron.com
Save
Cancel
Figure 7.
Network Screen: DHCP on (left) and DHCP off (right)
The
Domain Name
and
MAC Address
are read-only.
1.
If the IP addresses are assigned by DHCP, move the DHCP slider to the right, as shown in
figure 7 (left).
•
Whe
n DHCP is on, the
Host
Name
can be edited by pressing the right arrow (
>
).
There are no arrows next to the addresses and they cannot be edited because
they are set by the DHCP server.
•
When DHCP is off, the arrow next to the
Host
Name
disappears and it cannot be
edited. Arrows next to the
IP
Address
,
Subnet
Mask
,
Gateway
and
DNS
Primary
allow them to be edited.
If IP addresses are assigned manually,
move the DHCP slider to the left, as shown in
figure 7 (right).
TLP Pro 300M • Setup Menu
11
Содержание TouchLink TLP Pro 520M
Страница 1: ...TLP Pro 300M User Guide TouchLink TouchLink Pro Touchpanel Control Systems 68 3146 01 Rev A 04 20 ...
Страница 6: ......
Страница 8: ...TLP Pro 300M Contents viii ...