Extron electronics TouchLink TLP Pro 520M, Руководство пользователя

Страница: 14 / 40

TLP Pro 300M Rear Panel Features
B B B
C C C
D D D
A A A
G G G
H H H
E E E
F F F
Figure 3.
TLP Pro 300M Rear Panel Features
A Status light — The lights can blink or remain lit steadily and they can light red or green.
The lights can be configured (using Global Configurator) or programmed (using Global
Scripter) to provide feedback information about the system using these variables. Different
combinations, for example a red LED lit steadily or a green LED that is blinking, can be
associated with different events to provide indications about the system.
For information about configuring or programming this light, see the
Global Configurator
Help File or the Global Scripter Help File .
B
Reset LED
— Provides feedback about the reset status when the user presses the Reset
button (for an overview, see Reset Modes on page 28).
C
Reset Button — Pressing the Reset button allows the unit to be reset in any of three
different modes and can also be used to toggle between enabling and disabling the DHCP
client (see
Reset Modes ).
D
Menu Button
— Activates the setup menu (see
Setup Menu
on page 9).
E
Serial Number Label — The serial number is on a label on the right edge of the rear
panel, towards the top. The factory configured passwords for all accounts on this device
have been set to this device serial number. Passwords are case sensitive.
NOTE:
If the device is reset to default settings, the passwords are reset to the default
password, which is
extron
(for either
admin
or
user
).
F Security Screw — Used to attach provided tether kit. It requires a Torx screwdriver
(size T8).
G LAN/PoE Connector — The interface is compliant with the requirements of PoE
(PoE 802.3af, class 2) and must be powered by PoE power sourcing equipment (PSE).
This can be a power injector (see
Connecting a Power Injector on page 7) or PoE
switch.
NOTE: The PoE PSE must be purchased separately. Use an Ethernet cable to
connect the touchpanel to a PoE power injector (not provided).
An Extron IP Link Pro control processor must also be connected to the same network as
the TouchLink Pro touchpanel (see
www.extron.com for a list of compatible models).
H
USB Port
— One micro-B receptacle supports high-speed USB 2.0.
figure 3
LAN/PoE Connector
TLP Pro 300M • Panel Features 6