Extron electronics TouchLink TLP 350CV, Руководство пользователя

Страница: 52 / 54

Button Kits and Replacement
Button Kits
The TLP 350CV has ten dedicated, customizable function buttons to provide quick access
to key functions. The buttons must be associated with their function by configuring them with
Global Configurator (see the
Global Configurator Help File
).
The unit ships with the following default set of buttons installed:
Laptop Display On
PC Display Off
DVD Mute
Doc Cam Volume
Auxiliary Volume
Any or all of these buttons can be replaced if they are assigned different functions when the unit
is customized. Replacement buttons come in pre-packaged kits or can be ordered individually.
For full information and to download an order form, go to
www.extron.com .
Button Replacement
To replace one or more buttons on the front panel of the TLP 350CV:
1. Remove power from the TLP 350CV.The faceplate is snapped on and held in four places,
two on top and two at the bottom of the faceplate. Using an Extron Tweeker, gently push
down on the two top tabs as shown to release the faceplate.
2. The faceplate is still held by two clips on the bottom. While rotating the faceplate away from
the panel, push down on it slightly to release the two clips.
Release tabs in
two places.
Push down to
release bottom
clips.
Faceplate Retainer
(shown in red)
Rotate top of
faceplate forward.
Figure 47. Release the Faceplate Tabs
3. Tip the bezel forward as it is being removed so that the buttons do not fall out.
4.
Lay the bezel face down and remove the buttons that need to be replaced.
TLP 350CV and TLE 350 • Reference Material 44