Rear Panel Features
Figure 4 shows the TLP Pro 300M Series rear panel.
A
Status light
— Can be programmed to provide system feedback:
z
Light red or green
z
Blink or light continuously
For information about configuring or programming this light, see the
Global Configurator Help File
or the
Global Scripter Help File
.
B
Reset LED
— Provides feedback about the reset status when the user
presses the
Reset
button (for an overview, see
, on the next page).
C
Reset Button
— Pressing the
Reset
button allows the unit to be reset in
any of three different modes (see
).
D
Menu Button
— Activates the setup menu (see
E
Serial Number Label
— The serial number is on a label on the side wall of
the back enclosure. The
factory configured passwords for all accounts
on this device have been set to the device serial number. Passwords are
case sensitive.
NOTE:
If the device is reset to default settings, the password is the
default password configuration. The default password is
extron
.
F
Security Screw
— Used to attach provided tether kit. It requires a Torx
screwdriver (size T8).
G
LAN/PoE Connector
— Connect the touchpanel to a PoE power injector
(not provided) using a twisted pair cable, terminated with an RJ-45
B
B
B
C
C
C
D
D
D
G
G
G
H
H
H
E
E
E
A
A
A
F
F
F
Figure 4.
TLP Pro 300M Rear Panel
figure 4
connector. Connect the power injector to the LAN through a network switch. An Extron IP Link Pro control processor must also be
connected to the same network as the TouchLink Pro touchpanel.
See
on the next page.
ATTENTION:
•
The TLP Pro 300M is Power over Ethernet (PoE 802.3af, class 2) compliant. Do not power on the touchpanels until you
have read the Attention in the “Rear Panel Features” section of the
TLP Pro 300M Series User Guide
.
•
Le TLP Pro 300M supportent l’alimentation via Ethernet (PoE 802.3af, classe 3). Veuillez lire la partie « Attention » dans la
section « Rear Panel Features » du
TLP Pro 300M Series User Guide
, avant de mettre sous tension les écrans tactiles.
NOTE:
These touchpanels are shipped without a power injector. The power injector must be purchased separately.
H
USB Port
— One micro-B receptacle supports high-speed USB 2.0.
Front Panel Features
Figure 3 shows the TLP Pro 300M Series front panel.
A
LCD touchscreen
— The 3.5-inch, 320x480 resolution touchscreen is made with
Corning
®
Gorilla
®
Glass, which is stronger and more scratch-resistant than standard
glass, while maintaining touch sensitivity, color saturation, and brightness.
B
Motion sensor
(2) — Detects motion between three to five feet from the
touchpanel, and at least 15° from the center axis.
C
Light sensor
— Monitors ambient light level and adjusts screen brightness, based
on the settings configured using the
(see the next page).
A
A
A
B
B
B C
C
C
Figure 3.
TLP Pro 300M Front Panel
3
Product Category
