Extron electronics TLP Pro 1025 Series, Руководство пользователя

Страница: 27 / 48

Display
Press the
Display
button in the navigation panel at the top of the screen to open the
Display
screen.
Status
Display Audio Advanced Exit
Network
Auto Brightness
On Off
Wake on Motion
On Off
LCD Brightness
2
3
4
Minutes
Sleep Timer
On Off
0 50 100
Figure 11. Display Screen
The
Display
screen allows you to set the
Sleep Timer
,
Auto Brightness
,
LCD Brightness
, and
Wake on Motion
.
•
Sleep Timer — Toggle between On and Off .
If the
Sleep Timer
is on, after a period of inactivity, the screen goes dark to save power
(
Sleep mode
). Use the up and down arrows to set how long the period of inactivity should
be. The value can be between
1
and
120
minutes.
If the Sleep Timer is off, the panel does not enter sleep mode.
•
Auto Brightness — Toggle between
On
and
Off
.
If
Auto
Brightness is on, the light sensor (see figure 2 ,
D
, on page 6) monitors the
amount of ambient light detected and automatically provides a suitable amount of screen
backlighting for the situation.
If
Auto Brightness is off, the screen brightness is not affected by changes in the ambient
light.
•
LCD Brightness — Use the slider control to adjust the screen brightness between
0
and
100
.
•
Wake on Motion
— Toggle between On and Off . For this to work, the touchpanel must be
in sleep mode.
If Wake on Motion is on, and the touchpanel is in sleep mode, any motion detected by the
motion sensor (
B
) wakes the panel from sleep mode. The screen lights and all buttons
become functional.
If Wake on Motion is off, the panel does not wake in response to nearby motion and the
touchpanel can be activated by pressing anywhere on the screen.
Configuring the Motion Sensor
The
Motion Sensor
(
B
) detects motion between three to five feet from the touchpanel, and at
least 15° from the center axis.
•
If the Sleep Timer has been set and no motion has been detected for a user‑defined
period of time, the touchpanel enters sleep mode.
•
If the
Sleep Timer
has not been set, the touchpanel does not enter sleep mode.
•
If
Wake on
Motion has been set and motion is detected by the sensor while the screen is in
sleep mode, the screen display is restored and active.
•
If
Wake on
Motion has not been set and the screen is in sleep mode, touch the screen to
restore it to an active state.
figure 11
TLP Pro 525, 725, and 1025 Series Touchpanels • On-screen Menus 17