Network
Verify with your network administrator whether the IP address for the touchpanel is assigned by
Dynamic Host Configuration Protocol (DHCP) or set manually. If they are set manually, you need
to obtain an IP address, a subnet mask, a gateway address, and a Domain Name Server (DNS)
from the network administrator.
Press the
Network
button in the navigation panel at the top of the screen to open the
Network
screen.
Status
Display
Audio
Advanced
Exit
Network
DHCP
On
Off
Host Name:
DNS Primary:
IP Address:
Subnet Mask:
Domain Name:
Gateway:
MAC Address:
TLP-AB-CD-EF
192.168.254.251
255.255.255.0
0.0.0.0
00-05-A6-AB-CD-EF
Revert
Apply
127.0.0.1
Figure 7.
Network Screen
1.
If IP addresses are assigned by DHCP, press
On
.
If IP addresses are assigned manually,
press
Off
.
•
When DHCP is off, the
Host
Name
is grayed out and cannot be edited. All
addresses can be edited (as shown in figure 7).
•
When DHCP is on, the
Host
Name
can be edited. The addresses are grayed out
and cannot be edited because they are set by the DHCP server.
2.
If DHCP is on, press the
Host Name
button to edit the host name. The
Host
Name
dialog
box opens:
Figure 8.
Alphanumeric Keypad
Use the keypad to enter a new name, which appears in the
Host Name
text box.
TLP Pro 525, 725, and 1025 Series Touchpanels • On-screen Menus
15
