Extron electronics TLI Pro 201, Руководство пользователя

Страница: 18 / 46

HID Modules
For the TLI Pro 201 to work with your touchscreen display, you must have the correct
embedded HID module loaded onto the TLI Pro 201. The TLI Pro 201 comes with a large
range of HID modules already loaded.
1.
Connect your touch display to the TLI Pro 201 to see if it will work with one of the
existing modules.
2.
If not, go to the TLI Pro 201 page on the Extron website to see if a HID module
for your display is available for download. You can also check the TLI Pro 201
Compatible Devices document (also on the
Extron website ) to see if another HID
module can be used with your display.
The module can be added to the TLI Pro 201 using Toolbelt (see the
Toolbelt Help File
for instructions).
3.
If no HID module is available for your touchscreen display, submit a HID driver request
to Extron through an Extron Sales representative).
TLI Pro 201 Front Panel Features
A A A B B B C C C D D D
SIGNAL
INPUT OUTPUT
HDCP
TLI Pro 201
R MENU
Figure 5.
TLI Pro 201 Plus Front Panel
A
Power LED — Indicates the power status and the reset status of the unit.
B
Reset button
(recessed) — Allows the unit to be reset in any of three different
modes. It also allows the user to toggle between enabling and disabling the DHCP
client (see
Reset Modes
on page 33).
C
Menu button (recessed) — Opens the Setup Menu (see the next page) and
Calibration Screen (see page 21) for the interface:
Setup Menu
1.
Press the button briefly (less than 3 seconds) to open the internal menu screens.
2.
Press the button briefly for a second time to exit the setup menu.
Calibration Screen
1.
Press and hold the button (3 seconds or more) to open the Calibration screen.
2.
Follow the on-screen instructions to calibrate the touchpanel.
3.
Complete the calibration process or press the button briefly (less than 2 seconds)
for a second time to exit the
Calibration
screen.
D
Status LEDs —
•
Both the
SIGNAL
LEDs light green when a video signal is detected and are unlit
when no signal is detected.
•
The
OUTPUT SIGNAL
LED blinks amber when the video output is muted (when the
sleep or display timer expires).
•
Both the HDCP LEDs light green when HDCP content is detected and are unlit
when HDCP content is not detected.
figure 5
TLI Pro 201 • Panel Features 10