manualshive.com logo in svg

Extron electronics StudioStation 100, Руководство пользователя

Поделиться
Скачать
Extron electronics StudioStation 100 Скачать руководство пользователя страница 52

StudioStation 100 • Web-Based User Interface

45

HDMI Output Configuration

Figure 29. 

HDMI Output Configuration Panel

The refresh rate for the output of the StudioStation 100 can be selected from the drop-down 
list. Choose 

50

 Hz or 

60

 Hz. The 

Resolution

 of the HDMI output can be viewed in this 

panel. It is configured in the 

Encoder Settings and Metadata

 page (see page 50).

NOTE:

  The resolution of the local (preview) output follows (is based on) the recording 

encoder resolution.

Outputting and using a video test pattern

NOTE:

  No input signal is needed when using a test pattern for display device setup.

The 

OSD

 

Configuration

 panel in the 

Input/Output

 

Settings

 page allows selection and 

immediate output of one of eight internally stored test patterns to the HDMI output from 
the StudioStation 100 as well as to the recording and output stream. Video test patterns 
are helpful for calibrating connected displays or projectors for color, convergence, focus, 
resolution, contrast, and aspect ratio. The audio test option is used for testing audio output.
To select and output a test pattern:

1. 

Open the 

Input/Output

 

Settings

 page.

2. 

Expand the 

OSD

 

Configuration

 panel.

3. 

Select a pattern from the 

Test

 

Patterns

 drop-down list. A preview of the test pattern 

appears above the drop-down list. Available test patterns include the following:

Color Bars

Time Stamp

Pulse

Crop

Aspect Ratio 1.33:1

Aspect Ratio 1.78:1

Aspect Ratio 1.85:1

Universal OSD

Figure 30. 

Test Patterns

• 

Select 

Pulse

 to output an audio pulse of 400 Hz at -10 dBu for audio output 

testing.

• 

The 

Universal

 

OSD

 pattern can be displayed together with the main AV content 

because it overlays the video rather than replacing it. As a result, the universal OSD 
pattern can be used at any time (see 

Setting up the universal OSD

 on the next 

page).

The selected test pattern is immediately output to the display and reflected in the preview 
in the 

AV

 

Controls

 panel. The test pattern displays until another pattern, or 

Off

 is selected 

from the 

Test

 

Pattern

 drop-down list, or until unit power is recycled.

NOTE:

  When a test pattern is selected, it is streamed to the display, stream, and 

recording, overlaid atop the source AV material. If 

Off

 is selected from the 

Test

 

Pattern

 drop-down list, the test pattern is turned off.

figure 29 

figure 30 

Содержание StudioStation 100




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды