Extron electronics SMP 111, Руководство пользователя

Страница: 25 / 124

SMP 111 • Front Panel Operation 17
SMP 111 Power Up Procedure
NOTE: Before powering the SMP 111, ensure that all necessary devices are connected
properly. Devices do not need to be powered.
Connect the power cord to a 100 to 240 VAC supply (see Power Connection on
page 10).
Record a File
The SMP 111 creates MP4, M4V, and M4A media files. Recordings are stored to the 32GB
internal storage or to storage media connected to the front, rear, or RCP 101 USB ports.
The recording location defaults to the internal storage.
The internal 32GB SD card is field upgradable to different storage sizes. For instructions to
replace the SD card, see
Upgrading the SD Card on page 106 .
To configure an ad hoc recording:
1.
Press the front panel Record button.
2. Monitor the record time and remaining time on the embedded web page.
3. Press Pause to temporarily suspend recording. Press Pause again or Record to
resume the recording and place a chapter marker in the file.
4. Press Mark to create a chapter marker and a thumbnail if desired.
5.
Press Stop to cease recording and place an end of file maker on the recording.
Front Panel Lockout (Executive Mode)
To prevent accidental changes to front panel menu settings, enable executive mode.
Executive mode can be enabled and disabled from the front panel. Press the
Stop and
Mark buttons simultaneously for 5 seconds. It can also be enabled or disabled from the
web pages or using SIS (see System Settings on page 50 or Front Panel Lock
(Executive Mode) on page 71
When executive mode is enabled, any attempts to utilize the front panel buttons triggers the
Record, Pause, Stop and Mark LEDs to blink 3 times.
When executive mode is active, all functions and adjustments can still be made via USB,
RS-232, or Ethernet control (see
Remote Communication and Control starting on
page 63).
NOTE: Control buttons indicate the current recording or streaming status regardless of
executive mode.