Extron electronics SF 10C SUB, Руководство пользователя

Страница: 17 / 28

SF 10C SUB • Installation 9
WARNING:
AVERTISSEMENT :
•
Maintain at least a 2-inch (5 cm) clearance between the plunger on the cable
gripper and any other object in the ceiling space. This includes the space
between the eyebolt below the gripper and the mounting hardware above the
gripper. If an object strikes the plunger, the cable gripper could disengage and
allow the subwoofer to fall.
• Conservez au minimum 5 cm (2 " ) d’espace libre entre le piston sur le serre-
câble et tout autre objet se trouvant dans l’espace plafond. Il s’agit de l’espace
entre l’anneau de levage sous le serre-câble et le matériel de montage au-
dessus du serre-câble. Si un objet heurte le piston, le serre-câble pourrait se
desserrer et entraîner la chute du caisson de basses.
Thread the cable down through the cable gripper, through the eye
of one of the eyebolts, and back up through the lock.
Cable
Gripper
Plunger
Eyebolt
≥ 2"
(50 mm)
≥ 1"
(25 mm)
≥ 2"
(50 mm)
Countersunk
Washer
Locking Nut
(not shown)
Figure 4. Installing the Subwoofer with the Included Steel Cables
5. Pass the loose end of the cable through the eye of one of the eye bolts on the
subwoofer enclosure and then through the other hole in the cable gripper. Ensure that
at least 1 inch (25 mm) of cable comes through the other end of the gripper.
6. Repeat steps 4 and 5 for each corner.
4