Extron electronics PowerCage FOX Rx HDMI, Руководство пользователя

Страница: 12 / 45

PowerCage FOX HDMI • Introduction 4
Cable Transmission Modes
The transmitter and receiver are further categorized by the type of fiber optic cable,
multimode or singlemode, which defines the effective range of transmission:
• Multimode — Long distance, up to 2 km (6,560 feet) (depending on the fiber cable)
• PowerCage FOX Tx HDMI MM
•
PowerCage FOX Rx HDMI MM
• Singlemode — Very long distance, up to 30 km (18.75 miles)
• PowerCage FOX Tx HDMI SM
• PowerCage FOX Rx HDMI SM
NOTE:
The multimode and singlemode units are physically and functionally identical,
with the exception of the effective range of transmission. In this guide, any reference
applies to either transmission mode unless otherwise specified.
Features
Ultra high performance — Offers pixel-for-pixel HDMI or DVI-D (with an adapter) video
transmission, up to 1920 x 1200 at 60 Hz (in plus mode) or 1600 x 1200 at 60 Hz (in
non-plus mode).
Video input
— The transmitter accepts a single link of HDMI or DVI-D video.
EDID emulation mode (Display Data Channel [DDC]) — The PowerCage FOX Tx HDMI
transmitter provides a selector switch for specifying the rate of the incoming digital video
signal. EDID emulation mode allows proper operation
Video output — The receiver outputs a single link of HDMI video.
Extron fiber optic product compatibility — Enables ultra-long distance HDMI-to-analog
RGB and analog RGB-to-HDMI conversion without the need for extra signal conversion
devices.
Compatibility with FOX 500 DA6 distribution amplifier and FOX Matrix Switchers
Analog audio input
— The transmitter accepts an unbalanced stereo audio input on a
3.5 mm mini jack.
Analog audio input gain/attenuation — The input audio level can be adjusted within a
range of -18 dB (attenuation) to +10 dB (gain) via the RS-232 link.
Analog audio output — The receiver outputs balanced or unbalanced stereo audio on a
3.5 mm, 5-pole captive screw terminal.
Links monitoring
— The panels of the transmitters and receivers have indicators for
monitoring both fiber optic links.
Loss-of-light alarms — The rear panels of the transmitters and receivers have discrete
outputs that indicate if either of the fiber optic links has suffered a loss of the light signal.
FOX Extenders Control Program — For RS-232 remote control from a PC running
Windows
®
, the Extron FOX Extenders control software provides a graphical interface and
drag-and-drop, point-and-click operation.
Simple Instruction Set (SIS) — The transmitter and receiver use the SIS for easy remote
control operation.
Audio level
— The audio output can be set to either the consumer level (-10 dBV) or
professional level (+4 dBu) under RS-232 control.