Extron electronics NAV SD 101, Руководство пользователя

Страница: 31 / 82

NAV SD 501 and NAV SD 101 Scaling Decoders • HTML Operation 23
PRELIMINAR
Y
Video pane
See figure 16. If you change any of the settings in the
Video
dialog box (
1
through
4
),
the
Save
button (
5
) becomes selectable. Click Save to take changes or Cancel (
6
) to
abandon them. Clicking either button closes the dialog box.
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Figure 16. Video Output Configuration Dialog Box
1
HDCP Mode
— Click the drop-down list to select between
the following two output modes for the HDMI Output port (see
item
B
on page 6).
•
Follow Input (the decoder follows the streamed HDCP
encryption status)
• Always Encrypt (the decoder outputs HDCP encryption regardless of the content)
NOTE:
Follow Input
mimics the HDCP encryption state of the connected source.
Alway Encrypt
maintains the HDCP encrypted state with the output sink device to
improve system switching performance.
2
Video Output — Click the drop-down list to select among
the various output formats for the HDMI Output port ( item
B
).
The table below shows the available formats.
Format Format
Auto (follows input) HDMI YUV 444 Full
DVI RGB 444 HDMI YUV 444 Limited
HDMI RGB 444 Full HDMI YUV 422 Full
HDMI RGB 444 Limited HDMI YUV 422 Limited
3
Color Bit Depth — Click the drop-down list to select
between the following two output formats for the HDMI Output
port (see
item
B
).
• Auto — Adjusts color bit depth based on the display EDID
to supports 10 bit or 8 bit.
• Force 8 - Bit — Always uses 8 bit output.