MP 101 Series • MP 101 Series Rear Panels
5
Audio Output (Line Level)
Line Output
— A 3-pin, captive screw connector outputs to audio mixers, amps
switchers, or other non-microphone audio equipment.
Unbalanced Output
(high impedance)
Tip
Sleeve
NO Ground Here
CAUTION
For unbalanced audio, connect the sleeve(s)
to the ground.
DO NOT
connect the sleeve(s)
to the negative (-) contact.
(5 mm) MAX
Captive Screw
Connector stripping
3/16"
Tip
Sleeve
Ring
Balanced Output
Figure 4.
Audio Wiring Output
ATTENTION:
•
For unbalanced audio, connect the sleeve(s) to the ground. DO NOT connect
the sleeves to the negative (-) contact.
•
Pour l’audio asymétrique, connectez les manchons au contact au sol. Ne PAS
connecter les manchons aux contacts négatifs (–).
Low Cut Filter Switch
Low Cut filter switch
(
MP 101 AAP and MP 101 D
) — Provides low cut filtering to
remove wind and “table rumble” noise.
Phantom Power
Phantom Power
(
MP 101 AAP and MP 101 D
) — Provides switchable 48 volt
phantom power for condenser microphone.
4
