manualshive.com logo in svg

Extron electronics MLC 104 IP Plus Series, Руководство пользователя, Страница: 71 / 174

Поделиться
Скачать
Extron electronics MLC 104 IP Plus Series Скачать руководство пользователя страница 71

MLC 104 IP Plus Series • Software-based Configuration and Control

63

GlobalViewer Web Pages

Once an MLC (or other IP Link-based device) is configured using Global Configurator, 
GC generates the web browser-based GlobalViewer (GV) application for that unit. Once 
uploaded to the MLC, the GlobalViewer web pages allow the user to manage, monitor, and 
control the MLC and the devices connected to it.

NOTE:

  To work with GlobalViewer web pages, you must use Microsoft Internet Explorer 

version 6.0 or higher with ActiveX enabled.

See the 

Global Configurator Help

 file for specific information on how to use the software and 

perform basic setup tasks.

NOTE:

  If the MLC has been configured with passwords, the GlobalViewer web pages 

are password protected. Although default embedded web pages are accessible via 
the GlobalViewer web pages, non-administrators (personnel with only user access) 
are able to access only the Status default web page and some GlobalViewer Control 
pages.

Four screens for the MLC are available via GlobalViewer: 

Control

, 

Monitor

, 

Schedule

, 

and 

Info

 (

). Screens such as 

Monitor

 and 

Schedule

 appear only for ports and controlled devices that have been included in specific 

monitors or schedules that can be set up using GC. The 

Info

 screen appears for the 

overall system, not for specific connected devices.
See the 

Global Configurator Help

 file for details about each screen and how to use the 

GlobalViewer pages.
The following figures are examples of MLC GlobalViewer pages.

Содержание MLC 104 IP Plus Series















































































































































































Отзывы:

Нет отзывов