manualshive.com logo in svg

Extron electronics mediaport 200, Руководство пользователя

Поделиться
Скачать
Extron electronics mediaport 200 Скачать руководство пользователя страница 51

Filter

Figure 45. 

Filter Panel

The 

Filter

 panel is a search tool that allows available EDID settings to be filtered according 

to following parameters:

• 

Resolution

• 

Video Format

• 

Refresh Rate

• 

Audio Format

Favorites

Figure 46. 

Favorites Panel

The 

Favorites

 panel contains a list of favorite EDID for quick selection without having to 

search through all available EDID. EDID can be clicked and dragged from the  

Available EDID

 panel into the 

Favorites

 panel to be added as a favorite. To remove a 

favorite from the Favorites panel, right click the EDID being removed, and select  

Remove from Favorites

.

Connected Outputs

Figure 47. 

Connected Outputs Panel

The 

Connected

 

Outputs

 panel displays the EDID of the sink device that is connected to the 

HDMI Loop output. 

figure 45.  

Filter Panel

figure 46.  

Favorites Panel

figure 47.  

Connected Outputs Panel

 

MediaPort 200 • Product Configuration Software (PCS) 

44

Содержание mediaport 200





































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды