Extron electronics ISM 824, Руководство пользователя

Страница: 100 / 166

SIS
™
Programming and Control, cont’d
ISM 824 Integration Scaling Multiswitcher • SIS
™
Programming and Control
4-24
Command/Response Table for IP SIS Commands
Symbol definitions
X7)
= Switcher name (Up to 240 alphanumeric characters)
N
The following characters are invalid in the name: {space} ~ , _ @ = ` [ ] { } < > ‘ “ ; : | \ and ?.
X7!
= Default name ISm 824 + last 3 pairs of the MAC address
X7@
= Time and date (for set) In the format: MM/DD/YY
•
HH:MM:SS where :
MM = month: 01 (January) through 12 (December)
DD = 01 through 31
YY = 00 through 99
HH = 00 through 24
MM = 00 through 59
SS = 00 through 59
X7#
= Time and date (for read) In the format: Day,
•
DD
•
Mmm
•
YYYY
•
HH:MM:SS where :
Day = weekday: Mon through Sun
DD = 01 through 31
Mmm = month: Jan through Dec
YYYY = 2000 through 2099
HH = 00 through 23
MM = 00 through 59
SS = 00 through 59
X7$
= GMT offset –12.0 t14.0. Hours and minutes removed from GMT
X7%
= Daylight Savings Time 0 = Daylight Savings Time off/ignore
1 = Daylight Savings Time on (northern hemisphere)
2 = Daylight Savings Time on (Europe)
3 = Daylight Savings Time on (Brazil)
X7^
= IP address ###.###.###.###
X7&
= Hardware (MAC) address ##-##-##-##-##-##
X7*
= Number of open connections 0 - 255
X7(
= Password 12 alphanumeric characters
N
The following characters are invalid in passwords: {space} + ~ , @ = ` [ ] { } < > ‘ “ ; : | \ and ?.
X8)
= Domain name Standard domain name rules apply (for example: nnnnn@xxx.com )
N The following characters are invalid in a domain name: {space} + ~ , = ` [ ] { } < > ‘ “ ; : | \ and ?. The @ character is only acceptable as
the lead-in to the domain name (such as @extron.com).
X8!
= E-mail account 65 - 72. 65 = e-mail recipient 1, 66 = 2, 67 = 3, ... 72 = recipient #8
X8@
= E-mail address Typical e-mail address format (for example: nnnn@xxx.com )
X8#
= Notify when? 0 = no response 2 = fixed/restored
1 = fail/missing 3 = both 1 & 2
X8$
= Notification selections 01 through 12 = input 1 through input 12
13 through 16 = not used
17 = power supply
X8%
= Notify status (for read) 17-digit number. For each digit: 0 = do not notify, 1 = notify
X8^
= DHCP 0 = off, 1 = on
X8&
= Port # 00 through 99 (00 = all ports)
X8*
= Baud rate 9600, 19200, 38400, 115200
X8(
= Parity o dd, e ven, n one, m ark, s pace (only first letter required)
X9)
= Data bits 7, 8
X9!
= Stop bits 1, 2
X9@
= Port type 0 = RS-232 1 = RS-422
X9#
= Verbose mode 0 = clear/none (default for Telnet connection)
1 = verbose mode (default for RS-232/RS-422 connection)
2 = tagged responses for queries
3 = verbose mode and tagged for queries
N
If tagged responses is enabled, all read commands return the constant string and the value as the set command does
(for example, the read matrix name command
E
CN
}
, returns Ipn
•X7)]
).
X9$
= RAM status 0 = RAM dirty (needs saving to flash)
1 = RAM has been saved (ok to power off/reset)