IPCP 505 • Firmware Updates
85
Updating Firmware via Extron IP Link File Manager Software
This is the
recommended method
for updating the firmware for an IPCP. It allows you to
update one or several IPCPs at a time via an IP connection.
1.
Download the
.s19
firmware file.
2.
Start the IP Link File Manager (IPLFileManager) software on the connected PC. The
main IP Link File Manager window appears on screen, as does the smaller
Select
Startup Mode
window, shown below.
3.
Click one of the
Select Startup Mode
buttons (see image below) to choose how to
add an IPCP to the firmware update list, click
OK
, and follow any on-screen instructions
to add IPCPs.
•
Open Configuration File
— Select this
mode to open an existing configuration file.
•
Import GC2.x Project
(recommended) —
Select this mode to import a GC2.x project
file and the names and IP addresses of the
devices in it.
•
Manually Add IP Link Device(s)
—
Select this mode to add IPCPs individually by
IP address.
•
Automatically Detect IP Link Device(s)
— Select this mode to scan the
network for IP Link devices, including IPCPs. You may need to provide administrator
passwords for some units.
•
Use Previous Setup
— Choose this to show IP Link devices from your previous
session of IP Link File Manager.
See the
IP Link File Manager Help File
if you need additional details on how to use any
of those modes.
4.
Click on the
Options
menu and select
Reset Device After Firmware Update
.
This option causes the controller to perform a ZY reset, which resets all device settings
and deletes all files from the IPCP after the firmware is updated. See
details on page 78 in the SIS section.
5.
Click on the
Tools
menu and select
Firmware Update Manager
(see the image
at right).
The
Firmware Update Manager
window appears.
Содержание IPCP 505
Страница 1: ...IPCP 505 IP Link Control Processor 68 2026 01 Rev C 03 20 User Guide IP Link Products ...
Страница 6: ......
