Extron electronics IN1806, Руководство пользователя, Страница: 34 / 122

IN1806 and IN1808 Series Scaling Presentation Switchers • Operation 26
Using the On-Screen Menu System
The on-screen (OSD) menus are used primarily for the initial setup of the device. The
on-screen menu presents configuration options on a local monitor, and settings can be
adjusted with front panel controls.
NOTES:
• The on-screen menu has a default timeout of 60 seconds.
• The screen examples shown in this section show the OSD screens of an
IN1808 IPCP SA. The OSD for your product may differ slightly.
Menu Selection Buttons
MENU
ENTER
HOLD FOR 720p/1080p
1 1
2 2
3 3
4 4
5 5 6 6
Figure 15. Menu Selection Buttons
• Menu button — Press the
Menu
button (see figure 15,
1
) to activate or exit the
on-screen menu, deselect a submenu, or cancel a pending change.
•
Enter button
— Press the
Enter
button (
2
) to access the on-screen menu, select
submenus, or submenu items, or to accept pending changes.
•
Navigation buttons — Press these buttons to navigate through the menu system:
•
Press the
>
(
Up
) (
3
) or the < (
Down
) (
4
) arrow button to navigate submenus or
submenu items.
•
Press the
„
(
Right
) arrow button (
5
) to access currently selected submenus or
submenu items.
•
Press the
ƒ
(
Left
) (
6
) arrow button to exit currently selected submenus or
submenu items. You can also use the navigation buttons to adjust settings
according to specific setting directions.
15