Extron electronics IN1806, Руководство пользователя, Страница: 90 / 122

IN1806 and IN1808 Series Scaling Presentation Switchers • SIS Configuration and Control 82
Command ASCII Command
(Host to Scaler) Response
(Scaler to Host) Additional Description
Information Requests (continued)
View internal temperature E
20STAT
} X1@]
Verbose modes 2 and 3:
20Stat •
X1@ ]
View unit internal temperature
X1@
in
degrees Celsius.
Set verbose mode EX3$
CV
}
Vrb
X3$]
Set the verbose mode to
X3$
and enable
or disable tagged responses (additional
information provided in response to a
query).
View verbose mode E
CV
} X3$] View the current verbose mode.
KEY:
X1@
= Internal temperature
In degrees Celsius. Response is two digits, padded with a zero.
X3$
= Verbose mode (see the verbose mode
command description on page 58 for
more information)
0 = None (default for LAN connection)
1 = Verbose mode (default for RS-232 and USB connection)
2 = Tagged responses to queries
3 = Verbose mode and tagged responses
IP Control Port Commands
IP Setup
NOTES:
• Changes made to any TCP/IP settings do not take effect until the reboot network command (
E
2BOOT
}
) is issued.
• The following IP address setup commands that are followed by
24
require Administrator permission to enter. Attempts to
issue them without Administrator status result in an E24 (privilege violation) error message.
Set DHCP mode
24
EX1)
DH
}
Idh
X1)] Enable or disable DHCP.
View DHCP mode E
DH
} X1)] View the DHCP mode setting.
Set IP address
24
EX8&
CI
}
Ipi
•X8&]
Set the IP address to
X8&
.
Read IP address E
CI
} X8&] View the current IP address.
Set subnet mask
24
EX8(
CS
}
Ips
•X8(]
Set the subnet mask to
X8(
.
View subnet mask
E
CS
} X8(]
View the subnet mask setting.
Set gateway IP address
24
EX8*
CG
}
Ipg
•X8*]
Set the gateway IP address to
X8*
.
View gateway IP address E
CG
} X8*] View the gateway IP address setting.
KEY:
X1)
= On or off, enable or disable
0 = DHCP disabled (default), 1 = DHCP enabled
X6$
= Port timeout
Time in increments of 10 seconds before the port connection times out.
1 (10 seconds) through 65000 (650,000 seconds)
Default = 30 (300 seconds)
X8&
= IP address
Format nnn.nnn.nnn.nnn ( 192.168.254.254 = default)
Leading zeros in each of the four octets are optional in setting values,
and are suppressed in returned values.
X8*
= Gateway address
nnn.nnn.nnn.nnn ( 0.0.0.0 = default)
X8(
= Subnet mask
nnn.nnn.nnn.nnn ( 255.255.255.0 = default)
X9#
= Subnet mask in CISG commands
Prefix representing subnet mask bits (subnet mask value in CISG
commands).
Default =
/24 , which represents the default subnet mask,
255.255.255.0.