Extron electronics IN1806, Руководство пользователя, Страница: 117 / 122

IN1806 and IN1808 Series Scaling Presentation Switchers • Internal Web Pages 109
4. Click
Update
to begin (
2
). (If you want to cancel the update, click the
X
button in the
upper-right corner of the
Update Firmware
panel.)
During the updating process, a window appears in the middle of the screen, showing
messages giving the progress of the update:
Initializing
,
Installing the
Firmware
, and
Rebooting Device
(see figure 54).
Figure 54. Firmware Update Message Window
When the update is completed, the message window closes and the message
Firmware Upload Complete
appears near the top of the screen. The new firmware
filename appears beside
Version
in the
Firmware
panel of the web page.
Network Settings Panel
In the
Network Settings
panel (see figure 47 ,
7
, on page 103), you can set the IP
address, subnet mask, and gateway address for your IN1806 or IN1808 Series, and turn
DHCP on and off. You can also view the MAC address of the unit. To set the IP addresses:
1. Click
Edit
in the lower-left corner of the
Network Settings
panel. The
EDIT Network
Settings
screen opens.
Figure 55. Edit Network Settings Screen
54
55