1
IMPORTANT:
Refer to www.extron.com for the complete
user guide, installation instructions, and
specifications before connecting the
product to the power source.
IMP
ORT
ANT
:
Refer to www
.extr
on.com f
or the complete
user guide
, installation instructions,
and
specifications bef
ore connecting the
product to the po
wer sour
ce.
IN1608 Series • Setup Guide
The Extron IN1608 Scaling Presentation Switcher is an eight input, HDCP-compliant video scaler that accepts a wide variety of audio and video
formats. This guide allows an experienced user to set up and configure IN1608, IN1608 SA, IN1608 MA, IN1608 IPCP SA, and IN1608 IPCP MA 70
scalers. It covers how to perform basic operations using the front panel controls and selected Simple Instruction Set (SIS
™
) commands.
NOTE:
For full installation, configuration, menus, connector wiring, and operation details, see the
IN1606 and IN1608 Series User Guide
, at
www.extron.com
. For installation, configuration, and operation details of the IPCP Pro 350 control processor, see the
IPCP Pro Series
User Guide
.
Installation
IN1608 Series Rear Panel Connectors
100-240V ~ 1.5 A MAX
1
CONFIGURABLE
HDMI
HDMI
5
8
C
RS-232 IR
RS-232
IR
Tx Rx
Tx Rx
G
Tx Rx
Tx Rx
G
Tx Rx
Tx Rx
G
HDMI
A
B
3
INPUTS
OUTPUTS
AUDIO INPUTS
OUTPUTS
REMOTE
2
6
7
4
Tx Rx
RS-232
G
LAN 1
LAN 2
LAN 3
2x25W(8Ω)/2x50W(4Ω)
RESET
L
1
R
L
R
L
2
R
L
3
R
CLASS 2 WIRING
L
4
R
L
5
R
+48V
+48V
1
2
L
R
VARIABLE
1
2
MIC/LINE
L
6
R
50/60 Hz
RS-232
IR
IN1608 IPCP SA
OVER DTP
OVER DTP
AMPLIFIED OUTPUT
G
Tx Rx
G
Tx Rx
G
Tx Rx
3 4 G
1 2
RTSCTS
COM 1
COM 2
COM 3
DIGITAL I/O
1
S G
S G
2
IR/SERIAL
RELAYS
1 2 C
3 4 C
PWR OUT = 6W
eBUS
+V +S -S G
R
SIG
DTP IN
LINK
SIG
DTP IN
LINK
SIG
DTP OUT
LINK
J
L
A
B
C
D
G
H
E
F
I
K
Power and Input Connections
Output Connections
Control Connections
A
AC power connector
B
Configurable analog 15-pin HD (VGA) connectors (inputs 1 and 2)
C
HDMI input connectors (inputs 3 through 6)
D
DTP input and corresponding RS-232/IR Over DTP connectors
(inputs 7 and 8)
E
Analog audio input connectors (associated with inputs 1 through 6)
F
Mic/Line audio input connectors and adjacent phantom power LEDs
G
DTP output connector and
corresponding RS-232/IR Over
DTP connector (output C)
H
HDMI output connectors
(outputs A and B)
I
Analog audio output connectors
J
Amplified audio output connector
(SA, MA, and IPCP models only)
K
Remote RS-232
connector
L
IPCP Pro 350 control
processor (IPCP
models only)
M
LAN connector
(IN1608, SA, and MA
models only)
Figure 1.
IN1608 Series Rear Panel Connectors (IN1608 IPCP SA Shown)
The IN1608 IPCP models feature a built-in Extron IPCP Pro 350 control processor for controlling and monitoring a variety
of external devices, such as projectors and lights. See the
IPCP Pro Series Setup Guide
for more details.
NOTE:
The non-IPCP models have a LAN connector next to the Remote RS-232 connector (see
M
to the
right) instead of the IPCP Pro 350 control processor.
Mounting and Cabling
Step 1
—
Mount the device
a.
Turn off or disconnect all equipment
power sources.
b.
Mount IN1608 scalers to a rack
using the pre-installed rack ears
or use an optional mounting kit
for under-the-desk mounting (see
the two images to the right). The
IN1608 comes in a 1U, full rack width
enclosure. All other IN1608 models
come in 2U, full rack width enclosures.
Tx Rx
RS-232
G
LAN
2x25W(8Ω)/2x50W(4Ω)
RESET
OUTPUTS
REMOTE
L
R
CLASS 2 WIRING
1
2
L
R
VARIABLE
AMPLIFIED OUTPUT
O
M
IN1608 SA
Rack Ears
Rack Mounting
#8 Screw
(4) Places
Each Side
MBU 149
Mounting Bracket
Mounting Screws
(2) Places
Each Side
Furniture Mounting
