IN1608 xi Scaling Presentation Switcher • SIS Configuration and Control
56
Command and Response Table
Command
ASCII Command
(Host to Scaler)
Response
(Scaler to Host)
Additional Description
Input Switching Commands
Input selection
Video and audio
X!
!
In
X!
•
All
]
Select video and audio from input
X!
.
Video only
X!
&
In
X!
•
RGB
]
Select video-only from input
X!
.
Audio only
X!
$
In
X!
•
Aud
]
Select audio-only from input
X!
.
View video input
&
X!]
In verbose modes 2 and 3:
In
X!
•
RGB
]
View the current video input.
View audio input
$
X!]
In verbose modes 2 and 3:
In
X!
•
Aud
]
View the current audio input.
View current input
!
X!]
In verbose modes 2 and 3:
In
X!
•
All
]
View the current video and audio
input.
NOTES:
•
Audio breakaway (
$
) is not allowed to an input configured for any digital audio format.
•
Video breakaway (
&
) is not allowed from an input configured for any digital audio format.
•
Attempting either of these invalid modes gives an
E17
error.
•
Audio breakaway is always allowed back to the current video input.
Auto switch mode
Disable auto switch mode
E
0AUSW
}
Ausw0
]
Manual input switching only (default).
Prioritize highest active
input
E
1AUSW
}
Ausw1
]
Automatically switches to the highest
numbered active input.
Prioritize lowest active
input
E
2AUSW
}
Ausw2
]
Automatically switches to the lowest
numbered active input.
View auto switch mode
E
AUSW
}
X5$]
In verbose modes 2 and 3:
Ausw
X5$]
View the current auto switch mode.
NOTES:
X!
= Input selection
1-8
X5$
= Auto switch mode
0
= disable (default)
1
= gives priority to the highest numbered active input
2
= gives priority to the lowest numbered active input
