IN1608 xi Scaling Presentation Switcher • Introduction
3
Features
Video Features
•
Video inputs
— Four HDMI, two universal 15-pin HD inputs for RGB, component
video, RGBcvS video, S-video, or composite video, two DTP twisted pair inputs on
RJ-45, six stereo balanced/unbalanced audio inputs on captive screw, two mic/line
audio inputs on captive screw
•
Simultaneous video outputs
— Two HDMI outputs and one DTP/HDBT output on
RJ-45 drive up to three displays.
•
HDMI, HDTV, RGB, and video source integration into presentation systems with
audio switching
— Provides centralized switching for a wide range of AV sources.
•
Selectable output rates from 640x480 to 1920x1200, including 1080p/60 and 2K
•
DTP output compatible with HDBaseT-enabled devices
— The DTP output can
be configured to send video and embedded audio, plus bidirectional RS-232 and IR
signals, to an HDBaseT-enabled display.
•
DTP inputs and output support transmission of video, control, and analog
audio over a twisted pair cable
— Two DTP inputs and one DTP output support
digital signal transmission of HDMI, DisplayPort, DVI, 3G-SDI, or VGA plus control and
analog audio up to 330 feet (100 meters) over a shielded CATx cable.
•
Advanced scaling engine
— Image scaling and video format conversion are
performed at 30-bit precision for enhanced color accuracy and picture detail. Advanced
deinterlacing for all interlaced signals up to 1080i delivers optimized image quality.
•
Output muting control
— Provides the capability to mute one or all outputs at
any time. This allows, for example, content to be viewed on a local monitor prior to
appearing on the main presentation display.
•
Output volume control
— Provides master volume control for the variable line level
and amplified audio outputs.
Audio Features
•
Audio outputs
— One variable stereo audio output on captive screw, one variable
stereo audio output configurable as dual mono on captive screw, speaker outputs
on 5 mm, 4-pole captive screw connector (IN1608 xi SA models) or on 5 mm, 2-pole
captive screw connector (IN1608 xi MA models)
•
Two mic/line inputs with 48 volt phantom power
— Two mic or line level audio
sources can be independently mixed with program audio and embedded onto the HDMI
output. Selectable 48 volt phantom power allows the use of condenser microphones.
•
Mic ducking
— Automatically reduces program audio when a microphone signal is
detected, replacing the need for a separate audio ducking processor.
•
HDMI audio embedding
— Analog input audio signals can be embedded onto the
HDMI output signal.
•
HDMI audio de-embedding
— Embedded HDMI two-channel PCM audio can be
extracted to the analog outputs, or multi-channel bitstream formats can be passed to
the HDMI outputs.
