Extron electronics HC 404, Руководство пользователя

Страница: 26 / 73

HC 404 System • Hardware Features and Installation 18
LAN
N
LAN (IP) connector and LEDs — To connect the HCR 102 to an Ethernet network
(so you can configure and control the HCR 102 and the devices connected to it, and
for touchpanel control), plug a cable into the LAN RJ-45 socket (see
figure 3 ,
N
) and
connect the other end of the cable to a network switch, hub, router, or PC connected
to a LAN or the Internet. For details of communication protocols, ports, and services
used, see the
Pro Series Control Product Network Ports and Licenses Guide at
www.extron.com .
Cabling:
•
For 10Base-T (10 Mbps) networks, use a CAT 3 or better cable.
•
For 100Base-T (max. 155 Mbps) networks, use a CAT 5 or better cable.
You must configure this port before using it. Configure the settings via PCS, Toolbelt or
Global Configurator. See the help files for each software package for basic information
on configuration.
Activity LED — This yellow LED blinks to indicate
network activity.
Link LED — This green LED lights to indicate a
good network connection.
2
LAN
- XX-XX-XX
E######
22
- XX-XX-XX X
E#### ## #
LAN
Insert Twisted
Pair Wires
Pins:
1 2 3 4 5 6 7 8
HCR 102 Rear Panel
Ethernet
Link
LED Activity
LED
PC
AV Device
TCP/IP
Network
LAN (Ethernet)
Default protocol:
• IP address: 192.168.254. 250
• Gateway IP address: 0.0.0.0
• Subnet mask: 255.255.255.0
• DNS address: 127.0.0.1
• DHCP: off
• Link speed and duplex level:
autodetected
• Data rates: 10/100Base-T
Default login credentials:
• Username: admin
• Password: extron
RJ-45
Connector
Figure 8. LAN Connector and LEDs
O
MAC address
(see figure 3 ,
O
) — This is the unique
user hardware ID number (Media Access Control [MAC]
address) of the unit (for example, 00-05-A6-05-1C-A0).
You may need this address during device discovery and
configuration.
NOTE: Initial units ship
with the functions of
these LEDs reversed.
Subsequent units will
ship with the LED
functions as noted at left.
Keep the “LAN port defaults”
text set to “no color” (to use
as an invisible text/hyperlink
marker).
MAC: 00-05-A6- XX-XX-XX
S/N: ####### E######
00-05-A6-XX-XX-XX
MAC
Address