A green bubble in the
Network
panel lights when there is a network connection. A red square
appears if there is no connection. The FPC does not require a control processor, and a red
square appears next to the Controller IP to show that none is connected.
Network
Verify with your network administrator whether the IP address for the touchpanel is assigned by
DHCP or set manually. If it is set manually, you need to obtain an IP address, a subnet mask,
a gateway address, and a Domain Name Server (DNS) address (if needed) from the network
administrator.
Press the
Network
button in the navigation panel at the top of the screen to open the
Network
screen.
192.168.254.251
Figure 8.
Network Screen
1.
If IP addresses are assigned by DHCP, press
On
. The selected button is highlighted in yellow.
•
When DHCP is off, the
Host
Name
button is grayed out and host name cannot be
edited. All addresses can be edited (as shown in figure 8).
•
When DHCP is on, the host name can be edited. The addresses are grayed out and
cannot be edited because they are set by the DHCP server.
If IP addresses are assigned manually, press
Off
.
2.
If DHCP is on, you can edit the host name by pressing that button. A keypad opens:
Figure 9.
Alphanumeric Keypad
•
Use the keypad to enter a new name, which appears in the
Host
Name
text box.
•
Use the backspace character (
X
) to delete existing characters.
•
The right and left arrows move the cursor inside the
Host
Name
text box.
•
Click the
Shift
key to toggle between upper and lower case letters.
•
Press
Enter
to save the new name.
figure 8
figure 9
FPC 6000 • Setup Menu
14
Содержание FPC 6000
Страница 6: ......
Страница 8: ...FPC 6000 Contents viii ...
