Extron electronics FOX3 Matrix 160x, Руководство пользователя

Страница: 56 / 61

FOX3 Matrix Series Switcher • Maintenance and Modifications 48
Mounting Instructions
If desired, rack mount the switcher as follows:
1. Insert the unit into the rack, aligning the mounting bracket holes with those in the rack.
2. Secure the switcher to the rack using the supplied bolts.
Battery and Power Precautions
The Matrix Switcher is provided with a permanently installed (factory-soldered in place)
lithium battery. The battery maintains the real time clock in the event of power failure or
extended storage periods and does not affect the normal operation of the switcher. If the
battery becomes ineffective, return the switcher to Extron for repair.
WARNING: There is a danger of explosion if the battery is incorrectly replaced. Do
not attempt to remove or replace the internal battery.
AVERTISSEMENT : Si la pile est mal remplacée, il y a un risque d’explosion. N’essayez
pas de retirer ou de remplacer la batterie interne.
FOX3 Matrix Replacement Cards
Following are instructions to remove and replace I/O modules, fan assemblies and power
supplies. For many of the FOX3 Matrix frames, the parts are interchangeable, but not
for all of the frames. Below is a table with asterisks (
*
) indicating the frames and their
interchangeable parts.
FOX3 24x FOX3 40x FOX3 80x FOX3 160x FOX3 320x
8 port fiber I/O card MM
* * * *
8 port fiber I/O card SM * * * *
Power supply * *
Fan assembly * *
Controller card NA * * *
Audio card NA * * *
*
indicates the frames that share the same part