Extron electronics FOX3 Matrix 160x, Руководство пользователя

Страница: 53 / 61

FOX3 Matrix Series Switcher • Internal Web Page 45
Roles and Permissions Panel
The Roles and Permissions panel (see figure 28 ,
5
, on page 42) displays whether
Admin and User passwords have been set. It does not display the actual password.
NOTE:
The following rules apply to passwords:
• Length is 1-128 characters.
• All human-readable characters are permitted except
|
.
• The password cannot be a single space.
• Passwords are case-sensitive.
• If the
Admin
password is cleared, the user password is cleared as well.
• The factory configured passwords for all accounts on this device have been set to
the device serial number. In the event of a complete system reset, the passwords
convert to the default, which is
extron for the
Admin
and
User
.
To assign a administrator and user passwords:
1. In the
Roles and Permissions
panel,
click EDIT (see figure 34). The
Role and
Permission Settings
dialog box opens.
2.
In the
Admin
panel, click the Change
Admin Password link and enter the new
administrator password in the field below
(see figure 35).
3. Click in the Confirm Admin Password
field and enter the password from the
Change Admin Password field.
Figure 34. Roles and Permissions
Panel
4. To assign a user password, repeat steps 2 and 3 in the
User
panel.
5. When finished, click SAVE to
set the passwords. To close
the window without saving a
password, click
CANCEL or the X in
the upper-right corner.
Passwords can be changed but they
cannot be removed entirely. The FOX3
must have passwords at all times.
These fields cannot be blank.
Figure 35. Passwords Dialog Box
34
35