Extron electronics FOX3 Matrix 160x, Руководство пользователя

Страница: 21 / 61

Operation
This section describes the front panel operation of the FOX3 matrix switcher, including:
•
Front Panel Features
• Power
• Matrix Operations
• Secure Direct Port Access
•
Reset Operations
• Troubleshooting
Front Panel Features
NOTE: Below is the front panel for the FOX3 Matrix 80x. The other Matrix frames have
the same connection and power indicator LEDs.
FOX3 MATRIX 80x
PRIMARY REDUNDANT
FIBER OPTIC DIGITAL MATRIX SWITCHER
Extron
POWER
CONFIG
A A A B B B
Figure 8. Front Panel, FOX3 Matrix 80x Switcher
A
USB Config port — If desired, connect a control system or computer to the front panel
Configuration port .
NOTE: A front panel Configuration port connection and a rear panel Remote port
connection can both be active at the same time.
B
Primary and Redundant Power Supply LEDs — Light to indicate the power supply
status.
•
Green
— Indicates that the associated power supply is operating within normal
tolerances.
• Red — Indicates that the associated power supply is operating outside the normal
tolerances, there is no AC connected to the power supply, or the power supply has
failed (see
Removing and Installing a Power Supply Module on page 51 to
replace the power supply).
•
Unlit — Indicates that the power supply is not installed in the frame or is not fully
seated in the bay.
8
FOX3 Matrix Series Switchers • Operation 13