Extron electronics FOX3 Matrix 160x Скачать руководство пользователя страница 15

Страница: 15 / 61

Installation

This section details the installation and configuration of the FOX3 matrix switchers, including:

•

Setup and Installation Checklist

•

Rear Panel Boards, Cabling, and Features

Setup and Installation Checklist

Get Ready

Familiarize yourself with the FOX3 matrix switcher.

Obtain IP setting information for the matrix switcher from the local network administrator
(see

Network Settings Panel

on page 43).

Configure the Matrix Switcher

Install the desired I/O boards (see

Removing and Installing an I/O Module

page 49).

Install the Product Configuration Software (PCS) (see

Software/Firmware Installation

on page 30).

(Optional) Upload a System Map (see the

FOX3 Matrix Series PCS Help File

Perform Physical Installation

If desired, install the switcher in a rack (see

Mounting the Switcher

on page 47 ).

Cable input and output devices to the I/O boards (see

Rear Panel Boards, Cabling,

and Features

on page 8).

If desired, connect computers or control systems to any of the remote control ports on
the switcher

•

Rear panel Remote RS-232 serial port (see

Remote Port

on page 11).

•

Rear panel LAN port (see

Ethernet Connection

on page 10).

•

Front panel USB Configuration port (see

Front Panel Configuration Port

page 18).

Connect power (see

Power

on page 14).

Test the switcher by creating a tie (see

Output switching

on page 24).

FOX3 Matrix Series Switchers • Installation

Содержание FOX3 Matrix 160x






























































Результаты поиска

Содержание FOX3 Matrix 160x

Отзывы:

Похожие инструкции для FOX3 Matrix 160x

Бренды по названию

Популярные бренды

Extron electronics FOX3 Matrix 160x, Руководство пользователя

Результаты поиска

Содержание FOX3 Matrix 160x

Отзывы:

Похожие инструкции для FOX3 Matrix 160x

Бренды по названию

Популярные бренды