Extron electronics FOX II T HD 4K, Руководство пользователя

Страница: 33 / 41

FOX II T HD 4K Transmitter • Remote Control 25
Input/Output Configuration window
The
Input/Output Configuration
window allows you to set the input and output option
features of the transmitter (see figure 16). Select this window from either the
Status
or
EDID
Minder
window by clicking
Input/Output Config
on the menu bar.
6 6 5 5
7
7
8 8
2 2
3 3
4 4
1 1
9 9
¢ ¢
Figure 16. Input/Output Configuration Window
1 HDCP Authorized
checkbox — Select for the transmitter to act as an
HDCP-authorized device. Clear if you do not desire the transmitter to act
as an HDCP-authorized device. An HDCP authorized device allows an HDMI source to
output HDCP-encrypted video.
A non-authorized setting is useful for video sources that always encrypt their output if
the transmitter is HDCP capable. If the display connected to the receiver is not HDCP
compliant, this automatic encryption would result in no display.
2
HDCP Mode
radio buttons — Select the
Auto
radio button for the transmitter
to follow the input video HDCP encryption status on the Loop-through
connector. Select
On
to always encrypt the loop-thru output video regardless if
the input video is encrypted or not.
3
HDCP Notification
radio buttons — Select either the
Green
or
Black
radio button to select how the transmitter displays HDCP notification on a
monitor connected to its Loop-through output port.
The HDCP notification function in the transmitter enables a connected display to show a
green or black screen if the transmitted video is HDCP encrypted, and the display is not
HDCP capable.