Extron electronics EDID 101H 4K PLUS, Руководство пользователя

Страница: 16 / 35

EDID 101H 4K PLUS • Installation and Operation 8
Store an EDID in a User Store Slot
To store EDID from a connected display or other sink device:
1. Turn the rotary switch (see figure 5) to the desired user slot location (C through F).
2. Connect the display device to the output connector of the EDID 101H 4K PLUS (see
Figure 2 C ).
3. Connect a power source and apply power to the EDID 101H 4K PLUS
(see
Figure 2 C
). The power LED lights steady when power is available.
4. Power on the display device.
5. Press STORE once to store the display EDID to the memory slot selected in step 1. The
LED blinks. When the LED returns to solid, the EDID is stored (see figure 5).
NOTE: EDID stored in user slots C through F are saved until a new EDID is stored to that
slot or the device is reset.
EDID 101H 4K PLUS
Extron
SIGNAL
HDCP
IN OUT
STORE
EDID
0
1
2
3 4 5 6 7
8
9
A
B
C
D
E
F
CONFIG
Figure 5. Store LED, Button and Rotary Switch (in Position E)
X^
Rotary
Switch
Position
Native
Resolution
Refresh Rate
Type Video
Format
Audio
Format
1 0 1280 x 800 60 Hz IT HDMI 1.3 2-Ch
2 1 1600 x 900 60 Hz IT HDMI 1.3 2-Ch
3
2
1920 x 1200 60 Hz IT HDMI 1.3 2-Ch
4 3 2560 x 1440 60 Hz IT HDMI 1.4 2-Ch
5 4 2560 x 1600 60 Hz IT HDMI 1.4 2-Ch
6 5 720p 50 Hz CE HDMI 1.3 2-Ch
7 6 720p 60 Hz CE HDMI 1.3 2-Ch
8 7 1080p 50 Hz CE HDMI 1.3 2-Ch
9 8 1080p 60 Hz CE HDMI 1.3 2-Ch
10
9
4K / UHD 30 Hz CE HDMI 1.4 2-Ch
11 A 4K / UHD 4:2:0 60 Hz CE HDMI 1.4 2-Ch
12 B 4K / UHD 4:4:4 60 Hz CE HDMI 2.0 2-Ch
13 C Store Slot 1
14 D Store Slot 2
15 E Store Slot 3
16 F Store Slot 4
Figure 6. Rotary Switch Position EDID Selection
Store an EDID in a User Slot
Rotary Switch
Table