Extron electronics EDID 101H 4K PLUS, Руководство пользователя

Страница: 12 / 35

Front Panel Features
Figure 1. EDID 101H 4K PLUS Front Panel Indicators and Configuration Port
A
Power LED – Lights when an external power supply is connected and powered.
B
Config port – Connect a host computer using a mini USB type-B connector for
configuration using SIS commands or the PCS configuration software, and for firmware
updates (see
Connecting to the USB Port on page 21).
C
Signal LEDs – Lights when a HDMI signal is detected on the input and output.
D
HDCP LEDs
– The In LED Lights when the source device requires HDCP encryption
and the signal has been authenticated, and the Out LED lights when HDCP is
authenticated between the HDMI output and the connected sink device. This only
occurs when the source device requires HDCP and is authenticated.
If the source does not require HDCP or if the sink device is not HDCP compliant, the
LED does not light.
E
EDID Store LED – Lights steadily when power is connected. It blinks when the unit is
reading and storing EDID from a connected output device, returning to steady when
recording is complete.
F
EDID Store button – Press this recessed button to initiate reading and storing an EDID.
The EDID is stored to a user slot selected by the rotary switch. Up to four EDID files can
be stored.
Reset
–
To reset the EDID 101H 4K PLUS to its default state, press and hold the
EDID
STORE
button while applying power. As power is applied, all front panel LEDs blink 3
times indicating a successful reset.
G
EDID selection rotary switch – One 16-position rotary switch provides a choice of 12
pre-programed EDID files and 4 user stored files (see EDID Configuration on page 7),
and one EDID read from a connected display.
Front Panel features
EDID 101H 4K PLUS • Installation and Operation 4
EDID 101H 4K PLUS
Extron
SIGNAL
HDCP
IN OUT
STORE
EDID
0
1
2
3 4 5 6 7
8
9
A
B
C
D
E
F
CONFIG
A B C
D
E F G