DXP HD 4K PLUS Series • SIS Configuration and Control
36
Device-Initiated Messages
When a local event such as a front panel selection or adjustment takes place, the matrix
switcher responds by sending a message to the host. No response is required from the
host. Example switcher-initiated messages are listed here.
•
]
Password:
The
]
Password:
prompt requires a password (administrator level or user level)
followed by a carriage return. If the correct password is entered, the unit responds with
]
Login Administrator
]
or
]
Login User
]
, depending on the password
entered. If passwords are the same for both administrator and user, the switcher
defaults to administrator privileges.
NOTE:
The password prompt is redisplayed if an incorrect password is entered.
•
Qik
]
The switcher initiates the
Qik
message when a front panel switching operation occurs.
•
Rpr
nn
]
The switcher initiates the
Rpr
message when a memory preset is recalled from the front
panel.
nn
is the preset number.
•
Spr
nn
]
The switcher initiates the
Spr
message when a memory preset is saved from the front
panel.
nn
is the preset number.
•
nn
Vmt
x
]
The switcher initiates the
Vmt
message when a video output mute is toggled on or off
from the front panel.
nn
is the output number.
x
is the mute status (
0
= off,
1
= on).
•
nn
Amt
x
]
The switcher initiates the
Amt
message when an audio output mute is toggled on or off
from the front panel.
nn
is the output number.
x
is the mute status (
0
= off,
1
= on).
•
Exe
n
]
The switcher initiates the
Exe
message when the Front Panel Lockout mode is toggled
on or off from the front panel.
n
is the mode (
0
= off,
1
= view only,
2
= basic mode only)
•
HplgO
nn
]
The switcher initiates the
HplgO
message when a hot plug event is detected on an
output.
nn
is the output number.
