Extron electronics DVS 605, Руководство пользователя, Страница: 51 / 133

DVS 605 • SIS Communication and Control 43
Command ASCII Command
(host to scaler
)
Response
(scaler to host
)
Additional Description
Input name
Write input name
EX!
,
X1$
NI
}
Nmi
X!
,
X1$] Set the name
X1$
for input
X! .
Read input name
EX!
NI
} X1$] View input X! name X1$
.
NOTE: To clear an input name, a single space character should be entered for X1$ . This resets the input name to the default value.
KEY: X! = Input selection: 1 to 5
X1$ = Text label or preset name, up to 16 characters
Input signal status (unsolicited)
Enable
E
S1NTFY
}
NtfyS1
]
Enable unsolicited response.
Disable
E
S0NTFY
}
NtfyS0
]
Disable unsolicited response (Default).
Query response
NOTE:
The switcher indicates via unsolicited SIS that signal status has changed on one of the inputs [In
00 • 0*0*0*0*0 ]
].
E
SNTFY
} X(] X(
=
1
- enabled,
0
- disabled.
KEY:
X(
= Enable/disable:
0
= off/disable,
1
= on/enable
Input EDID (VGA and HDMI)
Assign EDID to input
E
A
X!
*
X1(
EDID
}
EdidA
X!
*
X1(] Assign EDID resolution and refresh rate X1( for
input X!
.
View assigned EDID
data
E
A
X!
EDID
}
X1(] View assigned EDID resolution and refresh rate
X1(
for input
X!
.
Capture an output EDID
to custom slot
E
S
X@
*
X1(
EDID
}
EdidS
X@
*
X1(]
Capture output
X@
EDID to
X1(
(Valid for X1( =
3
,
4
,
5
,
6
,
7
only and
X@
=
1
or
2
only.)
Export EDID file
E
E
X1(
,
< filename >
EDID
}
EdidE
X1(] Exports EDID table X1( to < filename > .
Import EDID file
E
I
X1(
, < filename >
EDID
}
EdidI
X1(] Imports EDID X1( from < filename >.
Valid for X1( =
3
,
4
,
5
,
6
, and
7
.
NOTES:
•
EDID import / export commands use the device’s user file system to hold the imported or exported EDID file.
IPL File Manager or PCS can be used to move EDID files between a PC and the device’s user file system.
•
<filename> can optionally be a full path name on the device user file system.
•
Imported and exported EDID files must be have a .bin extension, carrying 128 or 256 bytes of binary data.
•
Exporting a default EDID table ( X1( value of
10
or greater) results in a HDMI LPCM-2Ch table being exported.
KEY:
X! = Input selection: 1 to 5
X@ = Output selection: 1 = Analog (VGA, YUVp, HDTV), 2 = HDMI.
X1( = Scaler resolution EDID emulation, 0 = Automatic: match current output resolution (default),
1
= Output
1
analog VGA connector,
2
= Output
2
HDMI connector,
3
= Custom EDID output rate
1
,
4
= Custom EDID output rate
2
,
5
= Custom EDID output rate
3
,
6
= Custom EDID/output rate
4
,
7
= Custom EDID/output rate
5
. For variables
10-92
, see the EDID table on page 37.