DVS 605 • SIS Communication and Control
40
X4&
=
Input signal or SDI genlock
0
= Disabled, (default)
1
= Input signal genlock enabled, locks output vertical rate to selected input vertical rate
2
= SDI genlock enabled, locks output vertical rate to applied genlock input (“D” models
only)
X4*
=
Input signal and genlock status
0
= Input signal or SDI genlock disabled
1
= Input signal or SDI genlock enabled, but cannot lock to applied input signal/SDI
genlock input. DVS defaults to set output rate/refresh
2
= Input signal or SDI genlock enabled, output locked to applied input signal/SDI
genlock input
X4(
=
Input HDCP HDMI authorization status:
0
= Block HDCP encryption
1
= Allow HDCP encryption (default for inputs 3, 4, and 5)
X5)
=
Horizontal genlock offset: range is ± the correct output resolution total pixels value
-1
(for example,
-2199
to
+2199
for 1080p
X5!
=
Vertical genlock offset: range is ± the correct output resolution total lines value
-1
(for example,
-1124
to
+1124
for 1080p)
X5@
=
Freeze status:
0
= All unfrozen
1
= All frozen
2
= Main frozen
3
= PIP frozen
SIS IP command definitions
X10)
=
Default name: combination of model name and last 3 hex pairs of MAC address
(for example
DVS-605-Series-07-8C-EC)
.
X10$
=
On and off status:
0
= off or disable
1
= on or enable
X10^
=
Unit name is a text string up to 24 characters drawn from the alphabet (
A-Z
), digits
(
0-9
), minus sign/hyphen (
-
). No blank or space characters are permitted as part of a
name. No distinction is made between upper and lower case. The first character must
be an alpha character. The last character must not be a minus sign or hyphen.
X10&
=
Local date and time format:
Set format is MM/DD/YY-HH:MM:SS; for example,
06/21/02-10:54:00
Read format is day, date month year (HH:MM:SS), for example,
Thu, 20 Feb 2003
(18:19:33)
X10*
=
IP address (
xxx.xxx.xxx.xxx
). Leading zeros in each of 4 fields are optional in setting
values, and are suppressed in returned values.
NOTE:
DHCP is disabled by default. Default IP is
192.168.254.254
.
X10(
=
Hardware (MAC) address (
00-05-A6-xx-xx-xx
).
X11)
=
Subnet mask (
xxx.xxx.xxx.xxx
). Leading zeros are optional in setting values in
each of four fields, and are suppressed in returned values. Default subnet mask =
255.255.0.0
X11!
=
V
erbose Response mode, (default =
0
for Telnet connections,
1
for RS-232 and USB
host control).
0
= Clear or none
1
= Verbose mode
2
= Tagged responses for queries
3
= Verbose mode and tagged responses for queries
NOTE:
If tagged responses is enabled, all read commands return the constant
string plus the data. For example command:
E
CN
}
response:
Ipn
•
X10^]
Содержание DVS 605
Страница 6: ......