Extron electronics DVS 605, Руководство пользователя, Страница: 122 / 133

To set audio to follow the PIP input , select the Audio Follows PIP checkbox (see
figure 85 ,
1
on the previous page).
To set audio to follow the main input , clear the Audio Follows PIP checkbox .
To disable IR control , select the Disable IR Control checkbox (
2
).
To re-enable IR control , clear the Disable IR Control checkbox.
Screen Saver
When no active video is detected on the selected input, the screen saver mode is
activated. The output sync can be disabled after a user-set duration, which allows display
devices to go into a low power, standby state.
To set the screen saver options:
1. Click the Black (default) or the Blue with On Screen Display (OSD) Bug radio
buttons to enable the desired screen saver background color (see figure 85 ,
3
).
• Black — Mutes the video output to black for a set duration before disabling the
output sync.
• Blue with On Screen Display (OSD) Bug — Displays a blue background
with a moving OSD bug that indicates
DVS 605: Input x No Signal
for a set
duration before disabling the output sync.
2. Adjust the duration of the screen saver to either of the following:
•
No screen saver (never disable output sync), by clicking the Never radio button
• To a user-defined duration (0-500 seconds), by clicking the radio button for the
duration field and then click the
up and down arrows. Alternatively enter a value in
this field.
NOTE: Setting this value to zero disables the output sync immediately when
no active input is detected.
Auto Switch
When enabled, the auto-input switching priority can be set to either start with the highest
active input or the lowest active input (see
Video Inputs on page 3).
To enable auto-input switching:
1. Select the Enable Auto Switch checkbox (
4
).
2. Select the desired priority option radio button from one of the following:
• Priority to highest active input number
• Priority to lowest active input number.
To disable the auto-input switching option clear the Enable Auto Switch checkbox.
HDCP Notification
HDCP notification indicates if HDCP content restrictions are preventing a video signal from
passing to the output (
5
).
When the Black option is selected, the output mutes to black if the connected display
device is not HDCP compliant and an HDCP encrypted input has been selected.
When the
Green option is selected, a green screen with
HDCP CONTENT
text is displayed
on the output if the connected display device is not HDCP compliant and an HDCP
encrypted input has been selected.
To select the display color , select the Black radio button or Green radio button.
DVS 605 • Using the Default Web Pages 114