DVS 510 Series • Operation
23
Input Configuration Menu
The
Input
Configuration
menu allows you to select a video signal type for the
configurable inputs: 5, 6, 7, and 9. (Inputs 1 and 2 are composite video only, inputs 3 and
4 are S-video only, and inputs 8 and 10 are DVI only.) The table below summarizes the
available signal types for each input.
Input 1
Input 2
Input 3 Input 4 Input 5
Input 6
Input 7
Input 8 Input 9
Input 10
Composite Composite S-video S-video RGB*
RGB*
RGB*
DVI
RGB*
DVI
YUVp/
HDTV
YUVp/
HDTV
YUVp/
HDTV
YUVp/
HDTV
RGBcvS RGBcvS RGBcvS
RGBcvS
YUVi
YUVi
YUVi
YUVi
*Default
You can also enable and disable film detection, select the horizontal and vertical start
positions, pixel sampling phase, total pixels, active pixels, active lines, and select an EDID
(extended display identification data) for an input. Rotate the horizontal (
[
) or the vertical (
{
)
ADJUST
knob to adjust the settings.
The following flowchart provides an overview of the
Input
Configuration
menu and
submenus and the options for each setting.
Next
Next
Input # 5
Film Detect: Off
Next
Film Detect
Turn Film Detection on
or off.
Input # 5
RGB
Input video type
For inputs
5
,
6
,
7
, and
9
,
select an available signal
format:
•
RGB
(Default)
•
YUVp/HDTV
•
RGBcvS
•
YUVi
Next
Input # 5
Vert Start: 128
Next
Vertical Start
Select a vertical start
line position for the top
edge of the active video.
Input # 5
Horz Start: 128
Horizontal Start
Select a horizontal start
pixel position for the left
edge of the active video.
Input # 5
Pixel Phase: 16
Pixel Phase
Adjust the pixel sampling
point.
Input # 5
Total Pix: 2750
Total Pixels
Specify the width in pixels
of the total image area to
be sampled.
Next
Next
Input # 5
Active Pix: 1920
Active Pixels
Specify the width in pixels
of the active image area to
be sampled.
Next
Input # 5
Active Lns: 1080
Active Lines
Specify the height in lines
of the active image area to
be sampled.
Next
Input
Configuration
Menu
User
Presets
Input # 5 EDID
1280x1024 60 Hz
Resolution
Select the input resolution:
•
Match Output (Default)
•
See the Resolution and
Refresh Rate table in the
“Output Configuration Menu”
section for a complete list of
available resolutions.
Refresh Rate
Select the rate:
•
50 Hz
•
59.9 Hz
•
60 Hz
•
75 Hz
Next
Figure 16.
Input Configuration Menu
