manualshive.com logo in svg

Extron electronics DVS 510, Руководство пользователя

Поделиться
Скачать
Extron electronics DVS 510 Скачать руководство пользователя страница 122

 

DVS 510 Series • Reference Information

114

IP Addressing

What is an IP Address?

An IP address is a 32-bit binary number that is used to identify each device on an Ethernet 
network. This number is usually represented by four decimal numbers (each in the range 
of 0 to 255) separated by dots, such as 198.123.34.240. This is called “dotted decimal 
notation.”
An IP address is divided into two parts:

• 

Network identifier

• 

Host identifier

Each address on a given network must have the same network identifier value but a unique 
host identifier. As a result, there are different classes of addresses that define the range 
of valid addresses and which parts of the address are used for the network and host 
identifiers. The table below shows the most common IP address classes. In this table, NNN 
refers to the network identifier and HHH refers to the host identifier.

Class Name

Valid Address Range

Identifier Arrangement

Class A

0.0.0.1 to 127.255.255.254

NNN.HHH.HHH.HHH

Class B

128.0.0.1 to 191.255.255.254

NNN.NNN.HHH.HHH

Class C

192.0.0.1 to 223.255.255.254

NNN.NNN.NNN.HHH

Choosing IP Addresses

If the computer and the DVS are directly connected or connected via their own independent 
network, follow the guidelines below to choose the IP addresses.
However, if you intend to connect your computer and scaler to an existing network, you 
need to ask the network administrator to allocate suitable IP addresses.
On an independent network, it is generally recommended that you use the Class C format 
(from 192.0.0.1 to 223.255.255.254).
There are two rules for choosing IP addresses:

• 

The network identifier must be the same for each IP address.

• 

The host identifier must be unique for each address.

By these rules, the first three decimal values of your class C IP address must all be the 
same, while the last value is identifies each device.
The following is an example of a 

valid

 Class C addressing scheme:

Device

IP Address

SPPCP Control Software Computer

208.132.180.41

DVS 510

208.132.180.42

NOTE:

  The host identifiers (

41

 and 

42

 in the example above) do not need to be 

sequential or in any particular order. However, it is recommended that you group the 
numbers for simplicity.

Содержание DVS 510

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды