manualshive.com logo in svg

Extron electronics DVS 304 Series, Руководство пользователя

Поделиться
Скачать
Extron electronics DVS 304 Series Скачать руководство пользователя страница 9

DVS 304 DVI Models

The DVS 304 DVI offers simultaneous digital and analog scaled outputs through the 
DVI-I port. Simultaneous analog scaled output is also available on BNC connectors. A 
total of 70 output scan rates are available from VGA (640x480) to WUXGA (1920x1200) 
resolution, as well as HDTV at 720p, 1080i, and 1080p/60 Hz. 
In addition the DVS 304 DVI features EDID Minder, which enables automatic and 
continuous management of the EDID information between the computer-video input 
source and the display, ensuring that the source powers up properly and reliably outputs 
content to the display. 

Features

• 

Four inputs 

—

 

• 

Input 1 – One BNC connector accepts composite video.

• 

Input 2 – Three BNC connectors accept composite video, S-video, or component 
video.

• 

Input 3 – A 4-pin mini-DIN connector accepts an S-video signal.

• 

Input 4 – A 15-pin HD connector accepts an RGB, component video, S-video, or 
composite video signal.

• 

SDI video input (optional) – One BNC connector accepts SDI video. During setup, 
the SDI input is assigned to input 1, 2, 3, or 4 (the default is none).

• 

RGB and video scaling 

— Provides a high performance scaling engine with the 

capacity to scale standard definition video, high definition video, and computer-video 
signals up or down in resolution.

• 

Picture control 

— Allows size, position, brightness, contrast, color, tint, detail, zoom 

and pan adjustments for each input.

• 

Picture-In-Picture 

— Allows for a low resolution (YUVi, S-video, composite video, 

and SDI) input and a high resolution (VGA and YUVp/HDTV) input to be displayed 
simultaneously. 

• 

Memory and input presets 

— Memory presets save sizing, positioning, and picture 

control settings. 
Input presets (on input 4 only) save input configuration, picture control, and OSD 
(on-screen display) text.

• 

Auto-Image 

— Auto-Image automatically sizes, centers, and optimizes the image to 

that of the scaled output rate, filling the window with the image.

• 

IP Link 

— IP Link-enabled products offer an integrated Web server with high 

performance architecture, global compatibility with industry standard Ethernet 
communication protocols, multi-user support, and a Web-based asset management 
application specifically designed to work with products that include IP Link 
technology.

 

DVS 304 Series • Introduction

2

Содержание DVS 304 Series

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды