•
Input 4 Presets/OSD
— The specific settings for size, centering, contrast,
brightness, detail, zoom, and input configuration for input 4 can be saved to a preset.
Up to 128 input presets can be saved. A saved preset can be recalled as desired.
Select a preset number and click
Save
or
Recall
as applicable.
NOTE:
Saving to an existing preset overwrites the prior saved data with the new.
In addition, this section enables the OSD text to be set for input 4.
The on-screen display provides a duration setting for the OSD text that appears at
each input 4 switch or input 4 preset recall.
•
Video Mute
— Select this to mute or unmute the video image. When selected, the
button text turns red.
•
Audio Mute
— Select this to mute or unmute the audio. When selected, the button
text turns red.
•
Freeze
—
Select this to freeze an image for use as a logo or for annotation.
•
Auto Image
— Select this to perform an auto image on an input.
•
Volume %
(DVS 304 A only)
— This slider allows the user to adjust the volume
percentage for each input.
I/O Configuration Tab
The
I/O Configuration
tab allows input and output configuration, as well as EDID
emulation settings to be adjusted.
Figure 37.
The I/O Configuration Tab Window
•
Input Configuration
—
Set a suitable video type for an input by clicking on the
drop-down box and selecting a listed video type. Check
Film Mode
if 3:2 pull down
detection for NTSC and 2:2 film detection for PAL video sources is relevant. Audio
levels for each input can be set via the up and down arrows.
•
Auto Image
—
Auto Image can be enabled or disabled for all inputs.
DVS 304 Series • SPPCP
62
