Extron DTP T HWP D and DTP T UWP D Series • Installation and Operation
16
Audio Configuration
The DTP T HWP D and DTP T UWP D series of products can embed analog audio inputs
onto the digital video output. Use Extron PCS software (available at
) or
to select the desired embedded audio mode.
NOTE:
If no VGA or HDMI signal is present, analog audio will be transported over
the DTP connection to the analog audio output of the receiver.
When an input is selected, audio transport over HDMI can be configured to operate in one
of three modes. Each input can be configured individually for any of the three modes.
•
Transport embedded digital audio (default)
— The embedded digital audio
content on the digital video input is transported. Analog audio is still separate from the
embedded digital audio on the HDMI signal and transported simultaneously over the
DTP output, not embedded onto the digital output.
•
Embed analog audio input
— The analog audio input is always embedded to the
digital output, replacing whatever content is already present on the embedded digital
audio. Analog audio is also transported over the DTP output as a simultaneous output.
•
Auto select between analog audio and digital audio
— When both analog audio
and embedded digital audio on HDMI are present, embedded digital audio on the HDMI
signal takes priority. Analog audio is transported simultaneously with the embedded
digital audio content that is already present on the DTP output.
