Extron electronics DSC HD-HD 4K Plus A Series, Руководство пользователя, Страница: 56 / 92

X2@
= Test patterns
Response is 2 digits padded with a zero.
0
= Off (default)
1 = Crop
2 = Alternating pixels
3 = Crosshatch
4 = Color bars
5
= Grayscale, 32-level split
6 = Audio Test (Crop pattern, OSD text Audio Test . Outputs pink noise at 48 kHz,
24 bits, channels 1 and 2.)
X2#
= Input video mode
0 = Single channel mode (default)
1 = Left-right column mode (Input is paired with the adjacent input connector: A or B.)
X2^
= Input presets — 1 to 128
Response is 3 digits padded with zeros.
X2*
= Output sync timeout — 1 to 500 seconds in 1-second increments
0 = The output sync is instantly disabled with no active input.
501 = The output sync never times out (default).
Response is 3 digits padded with zeros.
X2(
= Front panel lock (executive mode)
0 = Disable lock mode (front panel controls are available) (default).
1 = Enable lock mode (front panel controls are locked).
X3)
= OSD menu status
0 = Off (default)
1 = On (displayed)
X3!
= Verbose mode
0 = None
1 = Verbose mode (default)
2 = Tagged response for queries
3 = Verbose mode and tagged response for queries
NOTES:
•
In verbose response mode, the DSC responds with unsolicited responses for
value and setting changes that may result from a signal change, or a setting
adjustment made via another interface.
For example, the DSC can send out a notice of a change in some setting
without receiving a query via your PC. That change could have been a result of
an internal process, a selection made from the front panel, or a selection made
from the OSD. This is an example of a verbose (wordy) relationship between the
controller and a connected device.
•
If tagged responses are enabled, all “view” commands return the command
string plus the data, the same as in responses for setting a value. For example:
Command:
E
M SSAV
}
Response: SsavM
X1! ]
(tagged response)
or
X1! ]
(untagged response)
X3@
= Unit name — A text string of up to 63 characters. A-Z , 0-9 , and the hyphen ( - ) are
permitted.
The first character must be a letter .
The last character cannot be a hyphen.
No distinction is made between uppercase and lowercase letters.
X3#
= Default unit name:
DSC HD-HD 4K Plus A — DSC - HD-HD - 4K-Plus-A- XX - XX - XX
DSC HD-HD 4K Plus A xi — DSC - HD-HD - 4K-Plus-A-xi- XX - XX - XX
where
XX-XX-XX
are the last three character pairs of the MAC address of the unit.
DSC HD-HD 4K Plus A Series • Remote Configuration and Control 48