Extron electronics DSC HD-HD 4K Plus A Series, Руководство пользователя, Страница: 53 / 92

Symbol Definitions
• = Space
]
= Carriage return with line feed
}
or
|
= Carriage return with no line feed
E
or
W = Escape
24
= Superscripts indicate the error message displayed if the command is entered incorrectly
or with invalid parameters (see
Error Responses
on the previous page).
NOTE: If the unit does not support or recognize an entered command, it does not respond to
the command in any way.
X!
= Input selection
1 = HDMI A
2 = HDMI B (valid on the xi model only)
X@
= Output
1 = HDMI A
2 = HDMI B (valid on the xi model only)
X#
= Input video format
0 = No input signal detected
1 = HDMI
2 = DVI
X^ = Total lines
X&
= Total pixels
Response is 4 digits, padded with zeros.
X*
= Active pixels
Response is 4 digits, padded with zeros.
X(
= Active lines
Response is 4 digits, padded with zeros.
X1)
= On or off (enable or disable)
0 = Off or disable
1 = On or enable
X1@
= Internal temperature in degrees Celsius
Response is 2 digits.
X1#
= Horizontal and vertical frequencies
Response format is 3 digits with leading zeros and one decimal place (example: 075.3
).
X1$
= Text label, preset name, or logo name (up to 32 characters)
NOTES:
•
Input presets saved without a name are given the default name
Input
Preset nnn
(for example,
Input Preset 005
).
• Logos saved without a name are given the default name
Logo nn
(for
example,
Logo 05
).
X1%
= Picture adjustments — 0 to 127 . Default is 64
.
Response is 3 digits, padded with zeros.
X1^
= Horizontal and vertical position (depends on resolution)
Response is 5 digits with leading + or - and padded with zeros (example: -01075 ).
X1&
= Horizontal and vertical size (depends on resolution)
Response is 5 digits, padded with zeros (example: 01075 ).
DSC HD-HD 4K Plus A Series • Remote Configuration and Control 45